07932652649, 07508586840
07932652649, 07508586840

Industrial Roller Shutter Doors in Dawlish

Industrial Roller Shutter Doors in Dawlish​

Industrial Roller Shutter Doors in Dawlish: Compare Your Options

Not every opening needs the same kind of door. Some sites need strength, while others need light, air or easy walk-in access. So, before you buy, it helps to compare the main types side by side. We make Industrial Roller Shutter Doors in Dawlish in our own workshop, our engineers fit every door we sell, and we repair them whenever trouble strikes. At the same time, Industrial Roller Shutter Doors covers the whole UK, so this comparison helps readers in any town.

Five Industrial Door Types, Side by Side

Below, you see each door type with its good points and the things to watch. Then, at the end, we show how to mix them. Naturally, the right choice depends on what you store and how often you open up.

The Industrial Roller Shutter

Without doubt, this is the classic choice. Basically, steel or aluminium slats roll up into a neat coil above the opening.

Industrial Roller Shutter Strengths

  • Strong against break-ins, with grades from SR1 to SR5
  • Takes very little space, because it rolls up above the gap
  • Comes in many slat types, from perforated to 1.5–2mm boxed laths
  • Works by hand, or by motor from 60Nm up to 500Nm

Industrial Roller Shutter Weak Spot

  • A plain single skin shutter lets heat escape. Instead, pick 95mm or 100mm insulated laths if you heat the unit.
  • Also, a busy door needs a stronger motor, such as a three phase or high-cycle model.

    follow us

    07932652649

    If you need an industrial roller shutter door installation, repair or maintenance, then give us a call. Our highly experienced and qualified engineers are always ready to assist you.

    Call Us

    The Sectional Overhead Industrial Door

    Here, flat panels lift up along tracks and sit under the ceiling.

    Sectional Industrial Door Strengths

    • Very good insulation, so it suits heated workshops and cold stores
    • Glazed versions let in daylight
    • Extras like auto-reverse, finger-trap protection and weather seals
    • Plus, it links to fire alarms or building security
    • Repair and service – We don’t disappear after the job. We fix jammed doors, tired motors and broken locks, and we’re on the phone 24/7 if you need us.

    Sectional Industrial Door Weak Spot

    • You need clear ceiling space for the tracks and panels. Even so, this rarely matters in tall units, because the panels tuck away neatly.
    The Sectional Overhead Industrial Door​
    The Security Grille Industrial Door

    The Security Grille Industrial Door

    Generally, a grille protects your space but still lets people see in. For example, our IRSD 700 folds away neatly, while the IRSD 950 uses shielded locking points for stores and factories.

    Grille Industrial Door Strengths
    • Shows off your shop display after hours
    • Lets air flow through
    • Comes as a single or double door
    • Also, the IRSD 1000 adds emergency escape options for wide entrances
    Grille Industrial Door Weak Spot
    • A grille does not block wind or rain, so it works best indoors or behind a front door.

    PVC Strip Curtains for Industrial Doors

    Typically, strip curtains hang behind an open shutter. In short, they keep wind, dust and birds out while people and forklifts pass through.

    Strip Curtain Strengths Behind an Industrial Shutter

    • Clear strips, so staff see who is coming
    • Hold warm or cold air inside
    • Cut noise between work areas
    • Suit farms, cold rooms and food prep areas

    Strip Curtain Weak Spot Without an Industrial Shutter

    • They give no security, so always pair them with a shutter for night-time.
    PVC Strip Curtains for Industrial Doors
    PA and Wicket Industrial Doors

    PA and Wicket Industrial Doors

    Sometimes, you only need a door for people. In that case, a PA door or a wicket door is the answer.

    PA and Wicket Industrial Door Strengths
    • Staff walk in without opening the big industrial shutter
    • Wicket sizes of 562mm x 1610mm or 800mm x 1830mm
    • PA styles include fire exit, glazed, louvre and security doors
    • Hidden hinges and multi-point locks on every wicket door

    PA and Wicket Industrial Door Weak Spot

    • They suit people and trolleys, not vans or lorries.

    Mix and Match Industrial Doors for Dawlish Sites

    Usually, one door type alone cannot do every job. In real life, the best answer often uses two door types together. For instance:

    • Holiday park store at Dawlish Warren – a roller shutter with a wicket door
    • Seafront cafe – a grille over the glass front and strip curtains to the kitchen
    • Trade unit on Shutterton Industrial Estate – an insulated shutter with a PA door
    • Workshop with a heated floor area – a sectional door with glazed panels
    Industrial Roller Shutter Doors in Dawlish and Nearby

    Our team for Industrial Roller Shutter Doors in Dawlish also works in Teignmouth, Starcross, Kenton, Newton Abbot and Exeter. Further afield, we serve Plymouth, Torquay, Bristol, London and Leeds. In other words, wherever your site is, one call brings us to you.

    Mix and Match Industrial Doors for Dawlish Sites
    Still Unsure? Let Us Compare Industrial Doors for You

    To sum up, each door type has its own strengths, and the right mix fits your site best. We make, fit and repair Industrial Roller Shutter Doors in Dawlish and across the UK. Contact Us today for a free survey, and our engineer will compare the options on your own site.

    Go To Top

    Portfolio

    industrialrollershutte

    We are the top supplier of industrial roller shutter doors in the UK. We have a team of skilled and informative employees who are always available to assist.

    Useful Links

    Contact Us

    industrialrollershutterdoors © Copyright 2012 – ©2026   |  All Rights Reserved

    logo