07932652649, 07508586840
07932652649, 07508586840

Industrial Roller Shutter Doors in Bristol

Industrial Roller Shutter Doors in Bristol — Made, Fitted, Fixed

Every shutter goes through three stages: it gets built in a factory, fitted to your opening, and then serviced or repaired for years afterwards. At Industrial Roller Shutter Doors, we do all three ourselves, so nobody passes to anyone else. Our team supplies Industrial Roller Shutter Doors in Bristol for warehouses, workshops, cold stores, car parks and small trade units, and the same teams work across the rest of the UK too. Also, since we roll the curtain in-house, a strange-sized opening is never a reason to say no.

What a Bristol Unit Actually Needs From a Shutter

Wind and damp

Wind and damp

units near Avonmouth and the docks take a beating, so guides and bottom rails need proper sealing.

Daily traffic

Daily traffic

a forklift opening that runs 60 cycles a day wears out a cheap motor within two winters.

    follow us

    07932652649

    If you need an industrial roller shutter door installation, repair or maintenance, then give us a call. Our highly experienced and qualified engineers are always ready to assist you.

    Call Us
    Heat loss

    Heat loss

    a single-skin door on a heated workshop pushes your bill up every month.

    Insurance rules

    Insurance rules

    many landlords now ask for a tested rating, not just a strong-looking door.

    Fast help

    Fast help

    a stuck shutter closes the business, so response time matters more than a shiny brochure.

    Choosing the Right Industrial Roller Shutter Doors in Bristol

    Door type                                                                        

    Suits                                                    

    Worth knowing

    Manual chain drive

    Small units, low daily use

    Counterbalanced spring, hand chain, locking box

    95mm insulated chain drive

    Heated workshops

    Foam-filled lath, CFC free core

    Direct drive single skin

    Loading bays, plant rooms

    Galvanised laths, tough and simple

    High speed insulated direct drive

    Busy goods-in doors

    Opens quickly, holds temperature

    Sectional overhead

    Low headroom

    Panels lift up, floor space stays free

    Fire rated shutter

    Compartment walls

    Drops on alarm signal, 1–4 hour ratings

    Four Products Our Customers Ask About Most

    industrial-chain-drive_2-768x457

    95mm Insulated Chain Drive Shutters

    The lath is double-skinned with a polyurethane foam core. Because of that, heat stays in and machine noise stays down. Available with hand chain hoist or with single or three phase motors.

    Industrial-High-Speed-Direct-Drive-Insulated-768x432

    High Speed Direct Drive Doors

    Ideal where the door opens again and again all day. Less waiting for drivers, less cold air pulled inside, and far less wear on the barrel.

    Wicket Doors and PA Doors

    Instead of lifting a full shutter for one person, fit a wicket door into the curtain. Steel PA doors with multi-point locking work well as a separate staff entrance.

    PVC Strip Curtains

    PVC Strip Curtains

    Cheap, quick, and surprisingly good. They hold temperature in cold stores, keep birds and dust out, and still let a pallet truck pass straight through.

    Numbers That Decide Your Quote

    Size

    Size

    standard openings run up to roughly 7000mm x 7000mm, and larger goes on survey.

    Security level

    Security level

    SR2, SR3 or SR4 tested shutters when your insurer names a rating.

    Finish

    Finish

    galvanised as standard, then powder coat or plastisol in any RAL or BS colour.

    Lath choice

    Lath choice

    75mm galvanised single skin for security only, or 95mm foam filled where warmth matters.

    Guides

    Guides

    usually 100mm x 50mm channels, sized up on wide or exposed openings.

    Motors

    Motors

    60Nm to 120Nm tube motors on smaller doors; 240V single phase or 415V three phase industrial motors on bigger ones, all with manual override.

    Industrial Roller Shutter Doors Bristol uk

    Repairs and Servicing for Roller Shutter Doors in Bristol

    Most breakdowns start small. A worn spring, a loose limit switch, a bent bottom rail after a pallet knock. However, ignore them and the repair bill grows fast. So we keep two things simple:

    • Planned service visits — springs, motors, safety brakes and fixings all checked and logged for your records.
    • Repairs on existing doors — we fix other makers' shutters too, not only our own.

    Old shutter past saving? We survey, remove it, and install a new one, often in a single visit.

    Beyond One City

    Bristol keeps us busy, but we also reach Bath, Gloucester, Swindon, Cardiff and further north. Therefore, if you run more than one site, one supplier can cover all of them with matching doors and one service schedule.

    One Last Thought Before You Sign Anything

    Ask any supplier three questions: who makes the curtain, who fits it, and who comes back when it sticks. If those answers name three different companies, you are the one chasing them. With Industrial Roller Shutter Doors, the answer is the same name every time. So, when you are ready for a survey, a price, or just an honest opinion on whether your old door can be saved, contact us and we will come and look at the opening.

    Go To Top

    Portfolio

    industrialrollershutte
    We are the top supplier of industrial roller shutter doors in the UK. We have a team of skilled and informative employees who are always available to assist.
    Useful Links
    Contact Us

    industrialrollershutterdoors © Copyright 2012 – ©2026   |  All Rights Reserved

    logo