Industrial Roller Shutter Doors in Royal Tunbridge Wells
Industrial Roller Shutter Doors in Royal Tunbridge Wells, Kent
Who makes your shutter? We do, in our own workshop. Who fits it on your site? Our engineers do. Who repairs it years later? Again, we do. That is what Industrial Roller Shutter Doors in Royal Tunbridge Wells means: manufacturing, installation and repair from one team. So, you buy once, and we stay with you for years. Besides, our London base serves the whole UK, so readers in Maidstone, Brighton, Guildford and other cities can use this guide too.
What to Choose: Industrial Roller Shutter Doors in Royal Tunbridge Wells
Every industrial shutter starts with your opening. Measure the width and height. Then, use the points below to choose. Also, an exact size gives you a smooth door and a tight lock.
Size
- Standard openings: From 1m to 12m wide and 2.5m to 6m high.
- Bigger openings: We also build taller and wider doors on request.
Slat Types
- Flat slats: A simple, strong choice for everyday use.
- Insulated slats: They help keep heat in and cold out.
- Perforated slats: Small holes let air move through.
- Polycarbonate slats: They let light through, so the space stays bright.
If you need an industrial roller shutter door installation, repair or maintenance, then give us a call. Our highly experienced and qualified engineers are always ready to assist you.
Finish and Look
- Powder coating: A wide range of RAL colours to match your brand.
- Polyester coating: Longer protection against rust and harsh weather.
- Wood and metal effects: A softer look for older streets, without losing strength.
- Planning: Shops near The Pantiles may need council approval, so ask early. Then, send us your RAL colour, and we match it.
Why Steel Suits Busy Streets
- Security: Solid steel resists forced entry and damage.
- Weather: It stays reliable in heavy rain, wind and big temperature changes.
- Noise and light: Also, it blocks extra light and cuts street noise.
Single-Phase or 3-Phase?
- 3-phase shutters suit warehouses, factories and plants that need more power than single-phase.
- You open them with a remote or a wall switch.
- Also, you can add insulation, ventilation or vision panels.
Four Motor Choices
- Ultimate flange motor: It needs less side room than a direct drive motor, and it comes in 230V and 415V.
- GFA Ranger 90: For chain-driven doors, with a separate anti-fallback device.
- GFA Safedrive: The anti-fallback device sits inside the gear, so the door cannot drop.
- Gaposa Sidone MIDI: A strong 3-phase direct drive with a safety brake, and it suits heavy shutters.
- Also, with an inverter control unit, the Sidone MIDI keeps its settings after a power cut.
So, tell us how often you open the door, and we match the motor to your day.
PA Door Types for Different Jobs
A PA door lets people walk in without opening the big shutter. Besides, it keeps the inside temperature steady. Then, pick the type that fits your job.
Door Types
- Personnel doors: For workshops, large stores and sheds.
- Fire exit doors: They open easily from inside, so people leave fast in an emergency.
- Eco stock doors: Standard sizes and quick fitting. Also, the price stays friendly.
- Glazed doors: Natural light and a clear view. Moreover, fire-rated glass is available.
- Security doors: Reinforced slats and strong locks. As a result, high-risk sites stay safer.
- Louvre doors: Airflow for plant rooms and electrical units, with privacy.
Frame Choices
- Full frame: Reversible, so you pick right-hand or left-hand opening at fitting.
- No bottom frame: Fewer trip hazards, but you choose the hand in advance.
Where These Doors Work in Tunbridge Wells
- Independent shops around The Pantiles and Camden Road: Steel shutters in wood-effect or RAL colours.
- Workshops and units at High Brooms: 3-phase steel shutters with a PA door beside them.
- Garages in Southborough and Pembury: Electric steel shutters with a remote.
How a Good Industrial Door Company Works, Step by Step
Industrial Roller Shutter Doors follows the same steps on every job.
- First, we meet you, check your property and show you the options.
- Next, we take exact measurements for a tight fit.
- Then, we build your shutter to order.
- After that, our team installs it with little disruption to your business.
- Finally, we test it, so you know it works and protects as promised.
Later, if a motor fails, a slat breaks or the shutter slips out of line, we repair it, and we answer emergency calls 24/7. Also, regular care, with inspection, lubrication and testing, keeps a steel shutter working for many years.
Send Us Your Measurements Today
In short, a good shutter starts with the right size, the right motor and the right finish. Industrial Roller Shutter Doors in Royal Tunbridge Wells gives you all three, plus a PA door if you need one. So, Contact Us on 07932652649 or email info@industrialrollershutterdoors.co.uk with your opening size. We serve the whole UK, so your city gets the same service.
Portfolio
Useful Links
industrialrollershutterdoors © Copyright 2012 – ©2026 | All Rights Reserved