07932652649, 07508586840
07932652649, 07508586840

Industrial Roller Shutter Doors in St Ives

Industrial Roller Shutter Doors in St Ives​

Industrial Roller Shutter Doors in St Ives for Tight Old Spaces

St Ives is famous for its harbour, its light and its artists. Yet behind the postcards, the old part of town near the harbour has narrow, uneven streets and very old walls. Squeezing a modern door into one of these buildings takes more thought than fitting one on a new trade estate. With that in mind, this guide shows how industrial roller shutter doors in St Ives can fit small, awkward openings without spoiling the look of the street. Our workshop builds each door to size, our fitters install it, and our repair crew looks after it for years. That is the full job at Industrial Roller Shutter Doors, and we do it for firms in every part of the country, whether they trade in Hayle, Penzance, Norwich or Liverpool.

Why Old Buildings Need a Different Industrial Shutter

Every year, about 540,000 day trippers and 220,000 staying visitors come to St Ives. Naturally, shops, galleries, cafés and stores near the harbour work hard to keep their stock safe. However, old buildings bring their own challenges:

  • Very little room above the opening for a big roller box
  • Narrow side walls with no space for a bulky motor
  • Old stone or brick that cannot carry heavy loads
  • Streets where a bright metal box looks out of place
  • Salty air coming straight off the bay

Luckily, each of these has a clear answer.

    follow us

    07932652649

    If you need an industrial roller shutter door installation, repair or maintenance, then give us a call. Our highly experienced and qualified engineers are always ready to assist you.

    Call Us
    Do’s and Don’ts for an Industrial Door in a Tight Space

    Keep these simple rules in mind when you plan industrial roller shutter doors in St Ives buildings with little spare room.

    Hide the Motor Inside the Roller Shutter
    • Do: choose a tube motor. It sits inside the barrel, so it needs no extra room. For example, the Gorry 60Nm suits smaller shutters and comes with 60mm and 70mm adapters.
    • Don’t: squeeze a large side motor into a gap it does not fit.

    Where some side room exists, a flange motor works well too. In other words, it needs less space at the side than a direct drive motor, and it comes in 230V and 415V.

    Keep the Shutter Light for Old Walls
    • Do: pick aluminium slats. They weigh less, run quietly and resist rust in damp sea air.
    • Don’t: hang a heavy steel curtain on old brickwork before our team checks it.

    Generally, gauges of 22–24, 20–22 or 18–20 let you balance strength against weight.

    Make the Door Match the Street
    • Do: ask for a powder coat colour, such as RAL 7016 anthracite grey or RAL 9016 white, or a wood-effect finish.
    • Don’t: accept plain bare metal on a historic shopfront.

    Roller Shutter Doors in St Ives for Galleries and Studios

    Artwork, pottery and craft pieces cost a lot and are hard to replace. Above all, owners want strong cover at night while the window still looks inviting. These options help:

    • IRSD 700 retractable grille: folds into a small space when open, so it suits narrow shopfronts. Even better, it locks with a multi-point system.
    • Window roller shutters: made to the exact size of each window, with insulated versions that cut outside noise and heat loss.
    • SR2 security shutters: tested against crowbars and bolt cutters, which many insurers like to see.
    Roller Shutter Doors in St Ives for Galleries and Studios
    Industrial Shutter Options for Units on Higher Ground

    Industrial Shutter Options for Units on Higher Ground

    Thankfully, not every building in St Ives is old and cramped. Up the hill, the streets are wider, and units for builders, food suppliers and storage firms need bigger doors.

    • Sectional overhead doors: panels slide up into the roof space, which saves floor room and keeps heat in far better than a basic shutter.
    • High speed insulated shutters: open and close fast, which suits cold stores and busy loading bays.
    • PVC strip curtains: hang behind an open door and keep out wind, dust and flies while vans load up.
    Caring for Industrial Roller Shutter in St Ives

    Sea air near the harbour is hard on any metal part. Similarly, sand and grit find their way into guides and bearings. Our service visits cover:

    • Tower clearance and door alignment
    • Spring tension and shaft assembly
    • Cables, rollers and hinges
    • Cable and spring break safety devices
    • Manual chain gears and switches
    • Motor performance and limits

    We suggest a visit at least twice a year. Otherwise, small faults turn into a stuck door right in the middle of the summer season. Should anything fail at an awkward hour, our engineers answer the call day or night.

    Keep the Upgraded Industrial Shutter Running
    Fit the Right Industrial Door to Your St Ives Building

    Old walls and tight corners don’t have to mean a weak door. Overall, the right motor, the right slats and the right colour give you strong cover that suits the town. Please Contact Us with a photo of your doorway: ring 07932652649 or drop a line to info@industrialrollershutterdoors.co.uk. From there, we arrange a visit and price the job honestly. No matter which corner of the UK you trade in, the same team stands ready to help.

    Go To Top

    Portfolio

    industrialrollershutte

    We are the top supplier of industrial roller shutter doors in the UK. We have a team of skilled and informative employees who are always available to assist.

    Useful Links

    Contact Us

    industrialrollershutterdoors © Copyright 2012 – ©2026   |  All Rights Reserved

    logo